Anti-Slip GRP Stair Nosings are designed to improve stair safety by increasing slip resistance and clearly defining the leading edge of each step.
They help reduce the risk of slips, trips, and falls at the point of highest footfall.
By improving grip and visibility, stair nosings support safer use in wet, icy, oily, and high-traffic conditions.
Supplied made-to-measure, Anti-Slip GRP Stair Nosings fix directly onto the leading edge of new or existing steps. They provide a practical safety upgrade with minimal disruption.
Where full step coverage is required, Anti-Slip GRP Stair Treads are typically specified to provide slip resistance across both the going and the leading edge.
GRP Stair Nosings are suitable for commercial, industrial, public, and residential environments.
They are commonly specified for external staircases, fire escapes, access stairways, entrance steps, and emergency routes.
Internal use is typically limited to safety-critical applications such as emergency access and fire escape stairs.
For staircases with intermediate platforms, top landings, or extra-deep steps, Anti-Slip GRP Stair Landings may be required to provide full surface coverage.
The slip-resistant surface improves traction underfoot. The contrasting sight line clearly defines each step edge, helping to reduce trip hazards.
This supports compliance with British and European Building Standards, including Disability Discrimination Act (DDA) requirements for step visibility and changes in level.
Manufactured from durable Glass Reinforced Plastic (GRP), stair nosings are corrosion-resistant and UV stable. They do not rot or rust, making them suitable for long-term external use.
Installation Method
Installation is quick and efficient, helping to minimise disruption on site.
Anti-Slip GRP Stair Nosings can be installed using adhesive bonding, mechanical screw fixings, or a combination of both methods.
They are suitable for common substrates, including concrete, steel, and timber staircases.
A pre-drilling service is available to ensure consistent fixing positions and simplify installation where required.
Why Choose Non Slip Shop?
Anti-Slip GRP Stair Nosings are manufactured in the UK by Non Slip Shop, ensuring a high-quality, British-made product without unnecessary mark-ups or delays.
Our products are supplied made-to-measure as standard, manufactured to your exact requirements and typically dispatched within 2–5 working days.
Orders can be placed online for fast turnaround and competitive pricing, or our in-house technical sales team is available to provide expert guidance and rapid quotations.
We support projects of all sizes, with trade accounts available for contractors and repeat commercial customers.
View our full range of anti-slip stair products for stairs and landings.

Anti-Slip GRP Stair Nosings improve stair safety by increasing slip resistance and clearly defining the leading edge of each step.
They are designed to reduce the risk of slips, trips, and falls at the point of highest footfall.
Manufactured from Glass Reinforced Plastic (GRP), stair nosings are suitable for public, commercial, industrial, and residential environments.
They are used where step visibility, durability, and long-term safety performance are critical.
All products are manufactured in the UK to meet British Standards requirements.
They are supplied made-to-measure to suit individual stair layouts and site-specific conditions.
This makes Anti-Slip GRP Stair Nosings suitable for safety-critical staircases where compliance, durability, and consistent performance are essential.
Technical data is based on products we manufacture and supply daily across commercial, industrial, and public-sector projects throughout the UK.
Slip Resistance & Safety Performance
High slip resistance is a critical factor in stair safety, particularly at the leading edge of steps where pedestrians transition between levels. This risk is increased in wet, oily, external, or high-traffic environments.
Anti-Slip GRP Stair Nosings are manufactured with an integrated anti-slip grit surface and have been independently tested using the Pendulum Test Method in accordance with BS 7976-2, achieving the following results:
These values significantly exceed commonly accepted minimum slip resistance thresholds and indicate a very low slip risk in both wet and dry conditions.
The contrasting nosing edge (typically yellow or white) improves step visibility and helps reduce trip hazards, supporting compliance with DDA (Disability Discrimination Act) guidance for changes in level and step definition.
Choosing the Correct Stair Nosing Configuration
Anti-Slip GRP Stair Nosings are designed to protect and enhance the leading edge of each step, covering both:
When specifying stair nosings, the following dimensional considerations should be taken into account:
-
Length: Supplied made-to-measure, typically between 300mm and 3000mm
-
Going (depth): Available from 30mm up to 90mm
-
Riser height: Available from 30mm up to 90mm
-
Most commonly specified profile: 55mm x 55mm
Stair nosings are recommended where only the leading edge of the step requires protection.
For full step coverage, Anti-Slip GRP Stair Treads should be specified.
For oversized steps or intermediate platforms, GRP Stair Landing Covers may be required.
Material Specification & Durability
GRP (Glass Reinforced Plastic) is a proven material for external and safety-critical applications due to its strength, durability, and resistance to environmental degradation.
Anti-Slip GRP Stair Nosings offer:
-
High resistance to rot, corrosion, and moisture
-
UV stability for long-term external use
-
Resistance to chemicals and environmental contaminants
-
Consistent performance in wet, cold, and high-traffic environments
This makes them suitable for use on fire escapes, access stairways, entrance steps, public buildings, industrial environments, and external staircases.
Thickness Options & Load Considerations
Anti-Slip GRP Stair Nosings are available in different thicknesses to suit expected foot traffic levels:
If you are unsure which thickness is appropriate for your application, our technical team can provide guidance.
Installation Methods
GRP Stair Nosings are designed for straightforward installation with minimal disruption to existing staircases.
Recommended fixing methods include:
-
Adhesive bonded fixing – the primary and most commonly used method
-
Mechanical screw fixings – used where additional mechanical restraint is required
-
Combination fixing – commonly specified for external or safety-critical applications
A pre-drilling service is available to simplify installation and ensure consistent fixing positions.
Maintenance & Cleaning
Once installed, Anti-Slip GRP Stair Nosings require minimal ongoing maintenance. The textured anti-slip surface is easy to clean and maintains effective slip resistance over time.
Routine cleaning using standard cleaning methods is typically sufficient. For general maintenance, clean using hot soapy water and a clean sponge or mop, ensuring any accumulated dirt or debris is removed regularly.
To maintain long-term performance, we do not recommend the use of pressure washers, third-party salts, grits, or aggressive chemical detergents.
Technical Documentation & Downloads
For full technical data, test certification, and detailed installation guidance, you can download our comprehensive technical documentation or contact our technical team for application-specific advice:
This document provides additional detail for specifiers, contractors, and compliance officers requiring in-depth technical information.
How to place an order
Orders can be placed online for fast turnaround, or quotations can be obtained via email or telephone through our technical sales team.
Payment Methods
All major debit and credit cards are accepted.
-
Online Payments: Secure online payment via PayPal (no account required) or Sage Pay (debit and credit cards).
-
Offline Payments: Secure telephone payment, pro-forma invoice, or BACS / bank transfer.
-
Trade Accounts: 30-day credit terms available for approved, repeat, trade and commercial customers.
Delivery & Collection Information​
Typical Manufacturing Time: 2–5 working days.
Delivery Cost: From £8.20 (+VAT) for nationwide UK delivery. Free collection is also available from Telford, Shropshire.
Delivery Slot: All-day delivery (8am–6pm, Monday to Friday).
Courier Information
Orders under 1.4m are typically dispatched via Parcelforce using a next-day delivery service.
Items over 1.4m are delivered using our own transport on scheduled regional delivery routes. Panels larger than 1.4m may incur an additional courier charge of £20.00 (+VAT).
Delivery is also available to the EU, Northern Ireland, Isle of Wight, Isle of Man, and the Highlands & Grampian regions. Please contact us for a freight quotation.
Additional Delivery Details
Manufacturing lead times are approximate and subject to production capacity.
We will contact you in advance to confirm your delivery date. Specific access requirements can be noted at checkout, and we will do our best to accommodate them.
Live tracking is available once items are dispatched. All goods are usually delivered together. Proof of delivery requires a signature and photographic confirmation.